××厂××发动机上减速器修理流程优化研究毕业论文.doc

南京航空航天大学硕士学位论文  摘  要  当今国际形势总体上处于安全稳定状态，但国家内部的局部动荡和国与国 之间的争端却不断发生，我们必须提高警惕，加强我国的国防建设。航空发动 机修理作为国家国防事业的重要后盾，它担负着国家安全的艰巨任务。××厂 作为一家国营发动机修理企业，它的发动机上减速器的修理流程存在周期较长、 等待时间较多、返工几率较大、工序间衔接不紧密等严重问题。本论文运用流 程再造手段消除原流程的弊端，建立新的流程方案，以期提高××厂××发动 机上减速器修理的效率和质量，从而提高整个发动机修理流程的效率和质量。 首先，论文研究了大量国内外流程再造方面的文献和资料，总结国内外流 程再造的成功案例的经验，从流程再造的原则、手法、意义等方面出发给出流 程再造的理论框架。 其次，深入××厂××发动机上减速器修理车间，学习并研究发动机的结 构及其修理工艺，观察并记录现有的修理流程并进行整理，运用流程再造的理 论和方法对现有流程的弊端和缺陷进行分析和总结。 其三，结合当今流程再造的先进理论和成功案例，对××厂××发动机上 减速器修理现有流程所存在的弊端和缺陷进行分析，提出了解决问题的方案， 设计出上减速器修理的新的流程方案。 其四，对新的流程方案进行效果预测，表明现有的流程方案确实能够缩短 ××厂××发动机上减速器的修理周期，提高修理效率，降低修理成本。 最后，总结这次流程再造实践的经验，对流程再造的理论和实践提出一些 建议，对流程再造的发展前景进行展望。 关键词：流程再造，上减速器修理，修理流程，优化方案，效果预测 i ××厂××发动机上减速器修理流程优化研究 ABSTRACT Nowadays, international situation is in safety and stabilization, but the issues in nations or between nations are occurred continually, so we must heighten our consciousness and strengthen our national defense building. Being an important supporter of our national defense, the mending of aeroengine takes on hard assignment of our country’s safety. ** factory is a aeroengine mending firm managed by government, it has many serious problems such as: circle is very long, waiting time occurs hourly, the odds of redoing is high, the connection between working procedures is loose, and so on. This paper will take measures of process reenginnering to eliminate shorts of former flow, and then build a new one with the hope of improving the efficiency and quality of ** aeroengine up-retarder mending in ** factory, and then improving the efficiency and quality of the whole aeroengine mending. Firstly, the paper makes much research in literature and data in process reengineering in foreign or domestic country, summarizes inside and outside countries’ successful experience, and gives academic frame of process reengineering from aspects such as principle, technique, significance, and so on. Secondly, we got deep into ** aeroengine up-retarder mending workshop in ** factory, learnt and s