号码可携带业务在移动核心网中的功能实现与仿真研究-毕业论文.doc

号码可携带业务在移动核心网中的功能实现与仿真研究   A Dissertation Submitted to Shanghai Jiao Tong University for Master Degree of Engineering Functional Implementation and Simulation of Mobile Number Portability Service in Core Network Author：Bao Erjin Specialty: Electronics and Communication Engineering Advisor Ⅰ: Prof. Weisheng Hu Advisor Ⅱ: Senior Engineer. Songmao Li School of Electronic, Information and Electrical Engineering Shanghai Jiao Tong University Shanghai, China June 18, 2007 号码可携带业务在移动核心网中的功能实现与仿真研究 摘 要 近年来号码携带业务（MNP）已成为世界各国电信商倍受关注和实施 的业务。本文主要研究的方向是移动号码的可携带功能，通过信令中继 （MNP/SRF）在核心网中的功能实现以及仿真研究。 首先，本文阐述了号码携带业务国内外目前的发展状况，讨论了目 前比较成熟的几种技术方法，然后选择 MNP/SRF 无触发方式的功能作为 本次号码携带功能的实现方法。接着，根据移动核心网的结构，分析核 心网内各节点为实现号码携带业务各自需要完成的功能，明确地指出了 移动交换机在号码携带中需要完成的功能。最后，在移动交换机内信令 层上完成号码携带功能的功能实现。 在具体的研究中，本文着力于对移动交换机内部的信令模块进行代 码的开发与编写，主要实现移动交换中心（MSC）内外相应协议的转换， 号码携带业务相关参数的传输、转换、调用等，完成号码携带功能的调 用和控制。本文基于交换机模拟系统模拟并仿真所编写的代码，搭配 TTCNv3 协议模拟软件模拟对外部的信令协议（ISUP 和 BICC）的模拟，完 成号码携带业务在信令层上功能的测试。根据测试结果，验证了号码携 带业务在信令层上功能的完全实现。 关键词： 号码携带，信令，移动交换机，核心网 第  I  页 Functional Implementation and Simulation of Mobile Number Portability Service in Core Network ABSTRACT In recent years, Mobile Number Portability (MNP) has become a new promising service and attracts much attention from a variety of telecommunication carriers over the world. The primary research area of this thesis is the functional implement and simulation research of Mobile Number Portability by Signaling Relay Function (MNP/SRF) in the Core Network. Firstly, the thesis overviewed the current domestic and international status of the MNP service, and discussed several presently mature technologies. Secondly，we selected the MNP/SRF as the solution for the realization of MNP. Thirdly, based on the architecture of the core network, we discussed the functions that each node should be taken to implement the MNP and especially gave out a certain requirement in Mobile Switching Center (MSC). At last we implemented the MNP in MSC on the signaling level. In particu