9YFS-2.0型方捆捡拾压捆机喂入及压缩机构的分析和研究.pdfVIP

返 回 Return 2012 中国农业机械学会国际学术年会论文集 9YFS-2.0型方捆捡拾压捆机喂入及压缩机构的分析与 * 研究 １ ２ １ 李 林 闫秀芳 王 岩 （１内蒙古农业大学机电工程学院，呼和浩特 010018 ２内蒙古化工职业学院，呼和浩特 010010 ） [摘要] 本文以 9YFS-2.0 型自带传动动力恒频方草捆捡拾压捆机为研究对象，对该压捆机的输送喂入机构和压缩活塞机构采用 Solidworks 软件三维建模，并用 ADAMS 软件进行运动仿真分析。在压捆机工作部件中，输送喂入机构和压缩活塞机构的配合运 动关系是关键因素，通过运动分析，对二者的运动状态和运动规律有了明确的认识。在二者结构不变且运动不发生干涉的前提 下，最大限度的提高输送喂入叉的运行高度，使得压捆机的输送喂入叉端部进入压缩室的高度增大，牧草能够被更充分地送入 到压缩室，从而提高该牧草压捆机的压捆质量。同时，通过对输送喂入叉和压缩活塞的运动仿真分析，也为以后的压捆机研究 与改进提供数据支持和理论依据。 关键词：压捆机 喂入机构 压缩机构 运动仿真 Analysis and Study for Forage Transfer Mechanism and Compressing Mechanism of 9YFS-2.0 Rectangular Baler 1 2 1 Li Lin Yan Xiufang Wang Yan ( １College of Mechanical and Electrical Engineering in Inner Mongolia Agricultural University, Hohhot, 010018 ２ College of Inner Mongolia Chemical Engineeringpro fessional, Hohhot, 010010 ) Abstract Abstract: This paper use 9YFS-2.0 constant-frequency rectangular baler with own driving power system as research object. It mainly progresses design of forage transfer mechanism and compressing mechanism by adopting SolidWorks, simulation by adopting ADAMS .By kinetic simulation ,the movement state and law of the main mechanism are knowed. For the hay baler,matching forage transfer mechanism and compressing mechanism is key factor.By anlysis of kinetic simulation, position of forage transfer mechanism is improved on condition that machine construction is