基于印能捷流程的数据流控制模板的建立.pdfVIP

中国印刷与包装研究 2010年11月（第 2 卷） CHINA PRINTING AND PACKAGING STUDY Vol.02 2010.11 171 基于印能捷流程的数据流控制模板的建立 王钦雯  （华南理工大学制浆造纸工程国家重点实验室，广州 510640 ） 摘要 现代印刷生产在数字化信息处理和计算机控制技术的推动下，正在采用数字化生产流程进行印刷发展 的新变革。印刷数字化工作流程不仅通过印刷图文信息的数字化改变了传统印前、印刷工艺的面貌，而且通 过数字化的图文信息数据流的控制，改变了传统印刷生产的信息组织与传递，为印刷工业发展带来新的机遇 与挑战。本文以印能捷数字化工作流程为基础，重点研究数字化印前流程中数据流的控制方法，并根据实际 生产要求，采用理论分析和实验验证相结合的方式，通过设置各种不同格式及内容的文件，解析了数据流传 递与控制的关键节点、参数设置与优化，建立了一套模式化的、简单易用的数据流控制模板，实现了印刷数 据流在整个印前流程中准确顺畅的传递。本文的研究成果对印刷企业应用数字化生产流程提升印刷质量，提 高生产效率具有很好的理论指导作用和实际应用价值。 关键词 数字化工作流程；数据流；控制模板 中图分类号 TS801.8 Establish the Control Template of Data Flow Based on Prinergy Workflow WANG Qinwen (State Key Lab of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510640, China) Abstract Under the promoting of digital information process and computer controlling system, modern printing industry comes to a digital workflow era. Digital workflow not only changed conventional prepress and printing process but also changed the organization and transmission of conventional printing information, which brings in both opportunities and challenges to printing industries. Based on Prinergy digital workflow, the control method of prepress data was studied. According to the requirement of printing production, through theoretical analysis and experiments, with analysis of key nodes of data transferring and controlling, and parameter settings and optimization, a set of data flow control template was established, which ensures smooth and accurate transmission of printing data stream in prepress workflow. What has been achieved in this paper has theoretical and practical significance in using digital workflow to improve the print