一种热轧板带材高精度凸度在线检测系统.pdfVIP

一种热轧板带材高精度凸度在线检测系统 ·1 · 一种热轧板带材高精度凸度在线检测系统 吴志芳 郭肖静 张玉爱 苗积臣 李立涛 邢桂来 （清华大学核能与新能源技术研究院，核检测技术重点实验室，北京 100084 ） 摘 要 本文介绍的凸度在线检测系统是板带材生产自动化与质量控制过程中的关键设备，安装在热轧板带材厂精 轧出口，能够实时测量热轧板带材的凸度、横断面轮廓等参数，并反馈给轧机调整板型。本文阐述了清华大学核研 院自主研制的X 射线高精度凸度在线检测系统（简称“ 凸度仪” ），该系统采用“双源-双排探测器” 的创新技术方案， 采用两个225kV 的X 光机作为射线源，使用自主研制的小像素单管式气体电离室作为探测器，并自主设计和研发 全套测量、计算方法及相关软件。系统的性能指标达到国家标准（GB/T 15636—2008 ）所规定的最高级（0.1% ）水 平，分项性能指标达到或优于国外同类产品，总体技术方案先进。该项技术打破了国外垄断，填补了国内空白。 关键词 凸度仪 气体探测器 热轧板带材 A System of High Precision for Measuring On-line Crown of Hot Rolled Plate and Strip Wu Zhifang Guo Xiaojing Zhang Yuai Miao Jichen Li Litao Xing Guilai (Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing, 100084) Abstract The crown on-line measuring system introduced in this paper is a critical device in the course of steel plate and strip production automation and quality control, and is placed at the exit of finish rolling in hot strip mills to measure the on-line crown of hot rolled steel strip, which is then fed back to the rolling machine to adjust the plate shape. This paper describes a system for measuring on-line crown of plate and strip that is developed by Tsinghua University independently (shortened as a profile gauge). This system adopts an innovative technical scheme of “double x-ray source and double rows of detectors”, with two 225kV X-ray machines as the radiation sources, and self-developed small pixel gas chamber array as the detector, and independently designed and researched whole set of measuring , computing methods and related software programs. Performance and indicators of the system reach the highest level (0.1%)