基于三维轻模型装配工艺产品设计信息集成.pdfVIP

基于三维轻模型的装配工艺与产品设计 信息集成 时应超，乔立红 （北京航空航天大学机械工程及自动化学院，北京，100191） 摘 要：为解决装配工艺设计系统与其他系统间三维模型信息交换和共享的问题，提出一种基 于三维轻模型的产品制造信息集成方法。通过分析数字化装配工艺设计对装配模型的信息需求， 在此基础上构建基于轻模型的装配工艺信息模型，利用统一的形式描述产品设计三维模型信息、 装配工艺信息及其之间的关系，建立实体几何模型与轻模型所表达的产品及装配信息之间的映 射，实现各系统间的信息共享与集成，为装配工艺设计提供完善的信息支撑。通过一产品设计 系统与装配工艺设计系统的集成实例验证所提出方法的可行性和有效性。 关键词：轻模型；实体模型；装配工艺模型；系统集成；模型重构 中图分类号：TH16 ；TP391 文献标识码：A Integration of assembly process and product design information based on three-dimensional lightweight model SHI Yingchao,QIAO Lihong (School of Mechanical Engineering Automation, Beihang University, Beijing 100191, China) Abstract: According to the exchange and sharing problems of three-dimensional (3D) model between assembly process planning system and other systems, a product manufacturing information integration method based on 3D lightweight model was proposed. Through analyzing the information need of digital assembly process planning, an assembly process information model based on lightweight model was built to describe three-dimensional model, assembly process information and the relationship. With the support of the model, the mapping of lightweight model, manufacturing information and solid model was built to achieve the purpose of information exchange between systems. In addition, a comprehensive information input for assembly process design was presented. An integration example between product design system and assembly process planning system was developed to illustrate the feasibility and validity of the proposed method. Key words: lightweight model; solid model; assembly process model; system integration; model reconstruction 0 引言 装配工艺设计作为连接产品设计与制造的桥梁，需要与企业的各种应用系统进