一种胶印油墨最佳印刷参数的确定方法的研究.pdfVIP

工艺研究与印刷质量控制 2010 中国印刷与包装学术会议会刊 252 Technical Study Print Qualit Proceedings of CACPP 2010 一种胶印油墨最佳印刷参数的确定方法研究 1 2 蒋文燕 ，王志宏 （1.浙江科技学院 轻工学院，杭州 310023 ；2.浙江影天印业有限公司，杭州 310011 ） 摘要 在标准印刷条件下，对胶印油墨的最佳印刷参数进行了实验研究。首先建立了相对反差与实地密度的 关系曲线，求出了最佳的实地密度和相对反差值。然后对在最佳密度下获得的初始TVI 曲线进行了网点增大 补偿，获得了理想的阶调复制效果。结果表明，这种确定油墨最佳印刷参数的方法是可行的。本研究对印刷 企业有一定的生产指导意义，可用于研究油墨与纸张的印刷性能，优化印刷参数，提高印刷质量，并为企业 实施规范化的过程管理提供基本的思路。 关键词 胶印油墨；实地密度；相对反差；TVI ；网点增大补偿 中图分类号 TP273.2; TS801 Method of Determining the Optimum Parameters for Offset Ink 1 2 JIANG Wenyan , WANG Zhihong (1.School of Light Industry, Zhejiang University of Science and Technology, Hangzhou 310023, China; 2.Zhejiang IMGS Printing CO., LTD, Hangzhou 310011,China) Abstract By experimental method, the optimum parameters for offset ink were investigated under standard printing conditions. Firstly, the relationship between solid ink density and print contrast was established, and the optimum values of solid ink densities and print contrasts were calculated. Then, perfect tone reproduction was achieved by dot gain compensation, in which the calibration curves were obtained by the target curves and the initial tone value increase(TVI) curves based on optimum SIDs. The results showed that this method of determining the optimum parameters for offset inks were practicable and reliable. This research has some practical guidance for printing companies, which can be used