描述血管支架力学性能的新概念_形状系数_杨杰.pdfVIP

J Biomed Eng 2006; 23( 1) 7477 * 1$ 2 2 2 1 杨　杰 　黄　楠　杜全兴　张　勇　陈　虬 1( 西南交通大学 应用力学与工程系, 成都　610031) 2(西南交通大学 材料科学与工程学院, 成都　610031) , , , , ; , , , Shape CoefficientA New Concept to Describe the Vascular Stent Mechanical Property 1 2 2 2 1 Yang Jie HuangNan Du ianxing Zhang Yong Chen iu 1( . . . , , 610031, ) Dept of Ap pl Mechanics and Eng Southwest J iaotong University Chengdu China 2( I nst. of M aterial Science. and Eng. , Southwest J iaotong University, Chengdu610031, China) AbstractIn this paper, w e advance a concept, shape coefficient, to describe the mechanical properties of shape factor concretely. wo sorts of shape coefficient are deduced from the plastic theory of bending beam Under. conditions of the same material and radius, a simple form of shape coefficient is acquired. he relevant computing results and experiment show t hat the limit load of vascular stent exists, and vascular stents in different w idth- thickness have the same shape coefficient so long as they are t he sam e shape. hese reveal the significance of the concept of shape coefficient and verify the correct ness of t he formula. Key wordsVascular stentShape coefficientLimit load Johnson, Crown, AVE , 1 , ( , , : BeStent, 316L) , - , , , , , Palmaz Schatz Johnson Crown AVE Jostent BardX , Wallstent, Adius ,