毕业设计（论文）-基于单片机的智能散热器的设计与实现.doc

毕业设计（论文） 题 目：基于单片机的智能散热器的设计与实现 院 系： 信息与控制学院 专 业： 班级学号： 学生姓名： 指导教师： 成 绩： 2012年 月 日  摘 要 笔记本电脑，便于携带，体积小，而且它的功能满足大多数人的需要，随着科学技术的近步带来的成本下降，笔记本的价格也为大多数人所接受。随着使用笔记本人数的增加，笔记本的各种问题也暴露出来，除了性价比之外，最关心的莫过于散热。笔记本在性能与便携性对抗中，散热成为关键的因素，笔记本散热一直是笔记本核心技术中的瓶颈。有时笔记本电脑会的死机，一般就是系统温度过高导致。为了解决这个问题，人们设计了散热底座，可以使笔记本产生的热量尽快的扩散到电脑外部，不影响笔记本的使用功能，不会使电脑的线路出现腐蚀现象，保证笔记本电脑的正常工作好的底座可以延长笔记本电脑使用寿命 本设计针对散热问题做了深入的探讨，并设计出一套基于单片机控制的智能散热底座，综合了成本和性能等相关因素，采用了STC公司以STC90C51核心搭建了该系统。在本着成本控制和推向市场的前提下，文中的电路简约而易于批量生产，在完成散热功能和最少成本的前提下达到了节能和智能。 关键词：散热底座；单片机；智能控制 ABSTRACT Notebook computer is portable and small, and its functions could meet the needs of the majority, with the developing of science and technology, the cost decline, and the price of the laptop base to be acceptable to most people. But with the increase in the number of using the laptop people, they exposed various problems, in addition to cost, people always concerned about dissipating heat extremely. In the confrontation of the laptop’s performance and portability, the most critical factor is dissipating heat, and laptop’s dissipating heat has been the bottleneck of the core technology. Sometimes it end up unexpected, it is always because of that the system temperature is too high. To solve this problem, people have designed heat dissipation base, the heat can remove from the laptop to the outside as quickly as possible, it does not affect the use of laptop, and its electronic line will not be eroded, to ensure the normal operation of laptop. A good base could extend the life of laptop. This design makes an in-depth discussion about heat dissipation, and design a microcontroller-based intelligent control of cooling base, synthesize cost and performance and so on, using the core STC90C51 Corporation built the system. Under the premise of cost and market, the circuit in this