三轴击实试样的土_水特征曲线分布.pdfVIP

29 6 武 汉 理 工 大 学 学 报 Vol. 29 No. 6 2007 6 JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY Jun. 2007 1 2 3 李顺群 , 高凌霞 , 任庆新 ( 1. , 300384; 2. , 116600; 3. , 110168) : 测量了某重塑粉质粘土三轴击实试样在脱水条件下的土水特征曲线, 并对其特点 行了分析比较三轴击 实试样下部的土水特征曲线(SWCC)和上部的SWCC 都具有 一般 SWCC 的典型特点, 但前者较后者明显右移; 结合层 的SWCC 有 一定幅度下移;受三轴击实试样制作过程影响,较密实的下部区段具有较高的 气值和较高的残余含水量, 而且, 沿试样高度不同,持有不同残余含水量的各区段对应的基质吸力基本相同 : 非饱和土; Tempe 仪; 轴平移技术; 三轴击实试样 : TU 432 : A :2007 Distribution of Soilwat r Charact ristic Curv s of Impact d Silty Clay Triaxial Sampl s 1 2 3 L I Sh unqun , GA O L ingx ia , REN Qi ngx in ( 1. epartment of Civil Engineering, Tianjin Institute of Urban Construction, Tianjin 300384, China; 2. epartment of Civil Engineering, alian Nationalities University, alian 116600, China; 3. School of Civil Engineering, Shenyang Jianzhu University, Shenyang 110168, China) Abstract: T he impacted triaxial samples made from silty clay were cut into five different sections along length. With axial translation technology applied, Tempe apparatus was employed to measure water content of the sections in different matric suc tion levels in dewatering condition. Therefore, soilwater characteristic curves (SWCC) of different sections could be obtained. The primary conclusions drawn from the test results were list as follow s. Firstly, SWCCs of all sections, including from upsides and downsides of triaxial samples, distinctly had the general traits. etermined by layer impacting, the S