用粉煤灰制备多孔陶瓷过滤材料的研究.pdfVIP

30 4 矿 冶 工 程 V o.l 30 ! 4 2010 08 MINING AN METALLURG ICAL ENGINEERING August 2010 1 2 熊 林 , 刘晓荣 ( 1. , 201900; 2. , 200235) : ,, , : , , 24% 10. 2MPa 4% 35% 1180 , , 3 41. 52%9. 37MPa36. 38%1. 14g/cm 96. 15% 94. 77% SEM : ;; ;; : X705 : A : 0253- 6099(2010) 04- 0091- 04 Study on Preparing PorousCeram ic FilterMaterialsUsing FlyAsh 1 2 XIO G Lin, LIU Xiaorong ( 1. The Research Institute of Baoshan Iron Steel CoLtd, Shanghai201900, China; 2. D epartmentof M aterials ng i neering, Shanghai Institute of Technology, Shanghai 200233, China) Abstract: W ith the industrialwaste fly ash asmain raw materia,l porous ceram ic filtermaterialshave been prepared. In order to optmi ize the formula and process parameters, the effects ofmoisture content, form ing pressure, sintering tem perature, dosage of binder and poremaking agent on the properties of the porous ceram ics were studied. The results show that the sintering temperature and poremaking agentdosage has the greatest influenceon theproperties of the por ous ceram ics. The binder dosage and form ing pressure come next, and themoisture content has the least. Under the conditions of 24% moisture content, 10. 2MPa form ing pressure, 4% binder dosage, 35% poremaking agent dosage and 1 180 sintering temperature, porous ceram ic filtermaterialw ith porzite and quartz asmain crystallinephases can be obtained, whose porosity, bend strength, volume density, water absorption, acid resistance and fastness to alkaliare 3 41. 52% , 9. 37MPa, 1. 14 g/cm , 36.