新型相变材料蓄放热特性实验研究.pdfVIP

研究论文 新型相变材料蓄放热特性的实验研究 邹同华 陈见兴 于静 郑晓峰 （天津商业大学天津市制冷技术重点实验室， 天津 300134） 摘要：在不同工况下，对装有新型相变材料 SXR－S 的蓄热装置蓄放热特性进行了实验研究，主要研究水的初始温度、流 速等对蓄热装置蓄放热特性的影响。研究表明，采用双渐开线的蓄热装置蓄放热过程比较稳定和均匀，改变水进入蓄热装 置的温度和流速会改变蓄、放热过程的快慢。蓄热时，入口水温越高，水的流速越大，蓄热过程越短，反之则越长。放热 时，入口水温越低，水的流速大，放热过程越短，反之则越长。 关键词：相变材料；蓄热；放热 中图分类号： TK512.4 文献标识码：A 文章编号：N091 Experimental research on the heat storage and discharge performance of a new phase change material Zou Tonghua Chen Jianxing Yu Jing Zheng Xiaofeng （Tianjin University of Commerce, Tianjin Key Laboratory of Refrigeration Technology, Tianjin 300134, China ） Abstract: The heat storage and discharge performance of a heat storage tank filled with a new phase change material (PCM) SXR-S was studied based on various working condition, specially on different inlet water temperature and velocity of flow. The experimental results indicate that the heat storage and discharge process of the heat storage tank with the twin involute configuration is steady-going and symmetrical, and that the speed of heat storage and discharge will be changed by altering the inlet water temperature and velocity of flow. On the occasion of heat storage, the higher the inlet water temperature and the greater the speed of flow is, the shorter the process of heat storage is, contrarily longer; and on the occasion of heat discharge, the lower the inlet water temperature and greater the speed of flow is , the shorter the process of heat discharge is, contrarily longer. Key words: phase change material(PCM) ; heat storage ; heat discharge 引言 前期对新型相变蓄热材料 SXR－S 进行大量样 在现有的能源结构中，热能是最重要的能源之 品试验，包括其密度、比热、导热性能、热膨胀性、 一。但大多数能源都存在着间断性和不稳定性的特 热稳定