CCNA 1 v3.1 Module 8 Ethernet Switching.ppt

CCNA 1 v3.1 Module 8 Ethernet Switching Purpose of This PowerPoint This PowerPoint primarily consists of the Target Indicators (TIs) of this module in CCNA version 3.1. It was created to give instructors a PowerPoint to take and modify as their own. This PowerPoint is: NOT a study guide for the module final assessment. NOT a study guide for the CCNA certification exam. Please report any mistakes you find in this PowerPoint by using the Academy Connection Help link. To Locate Instructional Resource Materials on Academy Connection: Go to the Community FTP Center to locate materials created by the instructor community Go to the Tools section Go to the Alpha Preview section Go to the Community link under Resources See the resources available on the Class home page for classes you are offering Search Contact your parent academy! Objectives Layer 2 Bridging Bridges Switch Operation Full Duplex Network Latency Switch Modes Store and Forward - A switch receives the entire frame before sending it out the destination port. Cut-Through - A switch starts to transfer the frame as soon as the destination MAC address is received. Spanning-Tree Operation STP States Types of Networks Collisions in Collision Domain Collision Domain Segmentation Increasing a Collision Domain Four Repeater Rule Round-Trip Delay Calculation Layer 1 Devices Extend Collision Domains Limiting the Collision Domains Segmenting a Collision Domain with a Bridge Broadcasts in a Bridged Environment Effects of Broadcast Radiation on Hosts in a IP Network Average Number of Broadcasts and Multicasts for IP Broadcast Domain Segmentation Data Flow Through a Network Segments Summary * * * ? 2004, Cisco Systems, Inc. All rights reserved. * ? 2004, Cisco Systems, Inc. All rights reserved.