加工工艺对ITER用NbTi超导线磁滞损耗影响.pdfVIP

F22 加工工艺对 ITER 用 NbTi 超导线磁滞损耗的影响 李建峰 1,2 刘维涛 1,2 严凌霄 1,2 朱思华 1,2 高慧贤 1,2 谢惠 久 1,2 王天成 1,2 刘向宏 1,2 冯勇 1,2 张平祥 1,2,3 （1.西部超导材料科技有限公司，陕西西安 710018 ；2.超导材料制备国家工程实验 室，陕西西安 710018 ；3.西北有色金属研究院，陕西省西安市 710016 ） 摘要：磁滞损耗是 NbTi 超导线的关键性能参数。对于超导磁体来说，低的磁滞损耗可以降低超 导线材用量，降低成本，提高稳定性等。在 NbTi 超导线的加工过程中，加工工艺的不同对磁滞 损耗的影响也较大。本文通过改变 NbTi 超导线加工过程中的热处理制度、扭转节距等加工工艺， 研究加工工艺对 NbTi 超导线磁滞损耗的影响。研究结果表明，通过减少热处理次数可以有效降 低磁滞损耗，而减小扭转节距也使磁滞损耗有降低的趋势。 关键词：磁滞损耗；ITER ；铌钛超导线；热处理 The effect of process on the hysteresis loss of NbTi superconducting Strand for ITER Li Jianfeng1,2, Liu Weitao1,2, Yan Lingxiao1,2, Zhu Sihua1,2, Gao Huixian1,2, Xie Huijiu1,2, Wang Tiancheng1,2, Liu Xianghong1,2, Feng Yong1,2, Zhang Pingxiang1,2,3 (1. Western Superconducting Technologies Co., Ltd. Xi’an 710018) (2. National Engineering Laboratory for Superconducting Materials Preparation Xi’an, 710018 ） (3. Northwest Institute for Nonferrous Metal Research, Xi’an 710016) Abstract: Hysteresis loss is the mainly performance parameter of NbTi superconducting strand. For superconducting magnet, lower hysteresis loss will reduce the total cost and improve the stability. In the manufacturing process, the process has an effect on the hysteresis loss. In this paper, the effect of heat treatment and twisting pitch on the hysteresis loss of NbTi superconducting strand were studied. The results show that the hysteresis loss is decreased with the decreasing heat treatment time, and the hysteresis loss has the decreasing trend with the decreasing twisting pitch. Keywords: Hysteresis Loss, ITER, NbTi