平行封焊机HPS9000 6.pdfVIP

Instructions Manual Section 5 Welding Power Supply. HPS 9000 Series Hybrid Package Sealer Return to HPS 9000 Manual Contents Section 5 HPS 9000 Series Hybrid Package Sealer. Welding Power Supply. 2 5.0.0 Welding Power Supply 2 5.1.0 Basic operation2 5.2.0 SWC 9001 AC Weld Control Front Panel 2 5.2.1 Mains On Switch2 5.2.2 Pulse Indicator 2 5.2.3 Power or Tap Switch 3 5.3.0 Welder Specification3 Pyramid Engineering Services Co. Ltd. Page 5.1 HPS 9000 Manual.Sect.5.doc Instructions Manual Section 5 Welding Power Supply. HPS 9000 Series Hybrid Package Sealer Section 5 HPS 9000 Series Hybrid Package Sealer. Welding Power Supply. 5.0.0 Welding Power Supply As outlined earlier in this manual there are several different types of welding power supply offered, each with its own benefits to the end result, that being the package weld. The three types offered are as shown:- (i) The Synchronous or AC (ii) The Capacitor Discharge or DC (iii) The High Frequency or HF Your machine has been supplied with option (i) above, the AC Synchronous system. The following instructions relating to the operation and set-up only relate to this supply. If you have a different supply and have not been issued with the additional instructions, please contact your local Pyramid representative. 5.1.0 Basic operation Pyramid’s Solid State Synchronous Timers are entirely electronically operated and are designed for use from the normal single-phase 50/60 cycle supply, tapings being provided to cover from 220 – 240 volts. The timer consists essentially of a Solid State Digital Counter coupled to a pair of thyristors, (electronic switches)