ADVISOR软件的混合仿真方法34858.pdfVIP

　　第 22 卷 　第 2 期 计 　算 　机 　仿 　真 2005 年 2 月 　　 ( ) 文章编号 :1006 - 9348 2005 02 - 0203 - 04 ADVISOR 软件的混合仿真方法 张翔 ,赵韩 ,钱立军 ,张炳力 (合肥工业大学机械与汽车工程学院 ,安徽 合肥 230009) 摘要 :该文首先介绍了前向仿真方法和后向仿真方法 ,分析了其工作原理和优缺点。接着描述了美国电动汽车仿真软件 ADVISOR 的混合仿真方法,它是以后向仿真方法为主 ,前向仿真方法为辅的混合仿真方法。然后以一混合动力汽车模型为 例 ,分析了 ADVISOR 的工作原理。最后具体分析了一个典型仿真模块—车轮模块的模型 , 比较了其中的前向路径与后向路 径的差异 ,具体说明了混合仿真方法的实现。该文对ADVISOR 软件的应用具有参考作用。 关键词 : 电动汽车;车辆 ;汽车 ;仿真 中图分类号:TP3 ; U4 　　文献标识码 :A Combined Backward/ Forward Simulation Approach in the ADVISOR ZHANG Xiang ,ZHAO Han ,QIAN li - jun ,ZHANG Bing - li ( ) School of Mechanical and Automotive Engineering , Hefei University of Technology , Hefei Anhui 230009 , China ABSTRACT :This paper firstly introduces the backward - facing approach and forward - facing approach and analyses their simulation principle and points out advantages and disadvantages in two methods above. Then describes the hybrid back ward/ forward approach in the American electric vehicle simulation software ADVISOR , in which the backward approach is the main role and the forward approach is similar to the backward approach. In the end , the principle of simulation of the ADVISOR is described by demonstrating a hybrid electric vehicle model , and the model of wheel/ axle that is a typic module in ADVISOR is analyzed. Based on those examples , this paper gives the differences between backward approach and forward approach in ADVISOR. This a good reference for the application of ADVISOR. KEYWORDS :Electric vehicle ;Vehicle ;Automobile ;Simulation 1 　引言