微粒子喷丸中碳钢疲劳性能分析.pdfVIP

45 11 Vol.45 No.11 2009 11 1378—1383 ACTA METALLURGICA SINICA Nov. 2009 pp.1378–1383 ∗ (, 610031) 109 cyc , 100 µm . , 2 35% 23%. , , . , , , , TG111, TG135 A 0412−1961(2009)11−1378−06 ANALYSIS ON FATIGUE PROPERTY OF MICROSHOT PEENED MEDIUM CARBON STEEL ZHANG Jiwang, LU Liantao, ZHANG Weihua State Key Laboratory of Traction Power, Southwest Jiaotong University, Chengdu 610031 Correspondent: LU Liantao, professor, Tel: (028 E-mail: luliantao@ Supported by National Natural Science Foundation of China (Nos and and National Basic Research Program of China (No.2007CB714705) Manuscript received 2009–04–24, in revised form 2009–08–03 ABSTRACT In order to analyze the fatigue property and residual stress relaxation process of microshot peened medium carbon steel, the 109 cyc fatigue tests of the specimens unpeened and shot peened by steel balls and ceramics balls with 100 μm in diameter were carried out by rotary bending fatigue machine in air at room temperature. The result shows that the fatigue limits of specimens peened by steel balls and ceramics balls are improved by 35% and 23% respectively, compared with that of unpeened specimen. Based on the test result of the residual stress in the fatigue process, the process and mechanism of residual stress relaxation are analyzed in detail. The cyclic yield strength of the material is the main factor controled the improvement level of the fatigue limit. KEY WORDS medium carbon steel, microshot peening, stress relaxation, fatigue limit, cyclic yield strength , ,