c8051f020的SMBUS通信c程序.docVIP

//------------------------------------------------------------------------------ // Example code for interfacing a C8051F0xx to three EEPROMs via the SMBus. // Code assumes that three 16-bit address space EEPROMs are connected // on the SCL and SDA lines, and configured so that their slave addresses // are as follows: // CHIP_A = 1101000 // CHIP_B = 1010001 // CHIP_C = 1010010 // // Slave and arbitration states are not defined. Assume the CF000 is the only // master in the system. // Functions: SM_Send performs a 1-byte write to the specified EEPROM // SM_Receive performs a 1-byte read of the specified EEPROM address (both include // memory address references). // // Includes test code section. //------------------------------------------------------------------------------------ // Includes //------------------------------------------------------------------------------------ #include c8051f020.h // SFR declarations //------------------------------------------------------------------------------------ // Global CONSTANTS //------------------------------------------------------------------------------------ #define WRITE 0x00 // SMBus WRITE command #define READ 0x01 // SMBus READ command // Device addresses (7 bits, lsb is a dont care) #define SlaveDeviceAddress 0xD0 // Device address for chip A //----------------------------------------------------------------------------------- //Global VARIABLES //----------------------------------------------------------------------------------- unsigned char xdata smb_write_buf[65]; unsigned char xdata smb_read_buf[64]; unsigned char byte_number; unsigned char cmd; unsigned char n = 0; bit read_set; //------------------------------------------------------------------------------------ // Function PROTOTYPES //------------------------------------------------------------------------------------ void read_smbus(unsigned char* pbyte,unsigned char adr,unsigned char len); void write_smbus(unsigned char* pbyte,unsigned ch