振动信号离散余弦变换域循环维纳滤波算法.pdfVIP

３５ ５ 　 　 　 　 　 　 　 Vol ．３５ No ．５ ２０１５ ５ 　 　 　 　 　 　 　 　 　 　 　 Journal of Xi ’an Technological University 　 　 　 　 　 　 　 　 　 　 　 May ２０１５ DOI ：１０ ．１６１８５／ ．xatu ．edu ．cn ．２０１５ ．０５ ．００４ j j * 　 ， ， （， ７１００２１） 　 ：　 ， ，． ，， ，，． ，，：， ，， DCT ． ：　 ；；； ：　 T N ９１１ ．４　 　 　 　 ：　 A ：　１６７３‐９９６５（２０１５）０５‐０３６０‐０５ CyclicWiener Filtering Algorithm in Discrete Cosine Transform Domain for Vibration Signals ZH A NG Fen ，H U Y an-tao ，S H I X ian- en g f g （School of Electronic Information Engineering ，Xi’an Technological University ，Xi’an ７１００２１ ，China ） Abstract ：　 To solve the problem that the non -stationary vibration signals ’ noise can not be directly removed by using the circulation Wiener filter ，the paper proposes the discrete cosine transform domain ’ s cycle Wiener filtering algorithm for vibration signals applying the discrete cosine transform to the circulation Wiener filter ．By using the characteristics of the energy concentration of discrete cosine transform and the cyclic linear phase filter of wiener filtering ，and combining both characteristics by the segmented processing method ，a better filtering effect and a lower order processing are achieved ．Based on the industrial field measurement of turbine vibration signals ，the algorithm is analyzed and simulated ． The simulation result show s that the algorithm has good noise filtering effect ，and can guarantee no significant phase distortion after filtering ． This algorithm is suitable for removing noise of vibration signals and better