受压区侧面粘贴钢板的钢筋混凝土梁短期刚度研究.pdfVIP

第27 卷第2 期 湖南文理学院学报( 自然科学版) Vol . 27 No. 2 2015 年6 月 Journal of Hunan University of Arts and Science(Science and Technology) Jun. 2015 doi: 10.3969/j.issn.1672–6146.2015.02.018 受压区侧面粘贴钢板的钢筋混凝土梁短期刚度研究 1 1 2 陈孔, 冯超 , 刘少斌 (1. 广西大学 土木建筑工程学院, 广西 南宁, 530004; 2. 湖南文理学院 土木建筑工程学院, 湖南 常德, 415000) 摘要: 对受压区侧面粘钢混凝土梁进行了静力试验, 试验中测量了不同集中荷载作用下的钢筋混凝土梁在不 同配筋率、不同粘钢截面面积时的跨中挠度。考虑粘贴钢板的作用, 将受压区粘贴的钢板换算成混凝土, 得 到一个T形截面, 给出了考虑粘贴钢板作用的混凝土梁短期刚度计算方法。讨论了集中荷载、配筋率和粘钢截 面面积等因素对受压区侧面粘贴钢板的钢筋混凝土梁短期刚度的影响。 关键词: 粘钢加固法; 钢筋混凝土梁; 短期刚度; 短期挠度 中图分类号: TU 375.1 文章编号: 1672–6146(2015)02–0062–05 Research on short-term stiffness of RC beam with steel plate pasting on its side on compressive zone Chen Kong1 1 2 , Feng Chao , Liu Shaobin (1. College of Civil Engineering and Architecture, Guangxi University, Nanning 530004, China; 2. College of Civil and Architecture Engineering, Hunan University of Arts and Science, Changde 415000, China) Abstract: The static tests of the RC beam with steel plate pasting on its side on compressive zone are carried out. And the mid-span deflection of RC beams with different reinforcement ratio and sticking steel sectional area are measured under different concentrated load. Then considering the role of pasting steel plate, the steel plate is converted to concrete to get a T-shaped section. Thus the calculating method of short-term stiffness of concrete beam