AZ91D镁合金化学镀Ni_P工艺参数研究_薛燕.pdfVIP

·128 · 　 　2008 922 9 AZ91D Ni-P ＊ 　, , , 　 (, 400050) 　　通过正交试验研究了工艺参数对镁合金化学镀镍磷镀层性能的影响, 获得了最 镀覆条件, 并考察了 镀后热处理工艺。研究表明:在 AZ91D 镁合金表面化学镀镍磷合金可有效提高镁合金的表面硬度和耐蚀性, 在最 工艺条件下可获得表面平整致密、镀层与基体结合良好、具有银白金属光泽的镍磷镀层;热处理可使镀层硬度上升, 但镀层的耐蚀性却下降, 获得最优综合性能的热处理温度为340℃。 　　　　　 Study on Process Parameters of Electroless Plating Ni-P on AZ91D Alloy XUE an, HUANG Weijiu,XIE Xiaowei,XU Kai (College of Materials Science and Engineering, Chongqing Institute of Technology, Chongqing 400050) Abstract 　　The effect of process parameters on the properties of the electroless plating layer on AZ91D alloy is studied by the orthogonal test method, and the optimal process parameters are obtained.Furthermore, the heat-treat- ment technics is also discussed.The results show that electroless plating Ni-P on magnesium alloy may effectively im- prove the surface hardness and anti-corrosion performance of magnesium alloy, and the Ni-P coating with good adhe- sion and silvery white metal luster may be obtained under the optimal process parameters.The heat-treatment after plating may result in an increase in surface hardness and a decrease in corrosion resistance of coating, and the heat- treatment temperature for optimal coating properties is 340 ℃. Key words　　electroless plating Ni-P, orthogonal test, process parameters, heat-treatment 　　, 、、 L, 15ml/L, 15g/L, , [1] , AZ91D pH 。 , 。 、、、、 1.2 　 : [2] ※※※※※※ 。 。, ※※※ , pH 、3 , [3-5] 。 , 。3 、、,