板形测量辊输出信号处理方法的研究与应用.pdfVIP

22 2 Vol. 22, No. 2 2010 2 Journal of Iron and Steel Research February 2010 1 1 1 2 刘佳伟 , 张殿华 , 王鹏飞, 王军生 ( 1. , 11000 ; 2. , 11 001) : , 1780 , , , , , 1 : ; ; ; : T G 3355 :A : 2010) 0200590 Research and Application of Shape Measuring Roll Output Signal Processing Method 1 1 1 2 LIU Jiawei , ZHANG Dianhua , WANG Pengfei , WANG Junsheng ( 1. Stat e Key Laboratory of Rolling and Automation, Northeastern University , Shenyang 11000 , Liaoning, China; 2. Anshan Iron and Steel Company , Anshan 11 001, Liaoning, China) Abstract:T he st rip flatness measuring value is important for flatness control. The accuracy value has direction effect on shape control. A throughout investigation was carried out on the flatness measurement system and shape control system of a 1780 tandem cold mill. On the basis of analyzing t he data processing method, a strategy con sisting of channelnumber determination, interpolation and data filter was used in flat ness control system. It was found that this strategy could improve disturbance rejection of system. When the data process method was used in decomposing real flatness measurements, accuracy values are obtained, it w as an accuracy flatness data process method. Key words:flat ness measurement; strip signal processing; interpolat ion dat a; w ave filtering , 1 板形测量系统 AGC , 11 , , , [ 1] , , , , , , , [ 2] , i : : ( 5053 020) : ( 1975 ) , , , ; Email:li