基于ANSYS的车桥耦合动力分析_谢秉敏.pdf

网络出版时间：2012-07-17 13:39 网络出版地址：/kcms/detail/50.1190.U1339.016.html DOI:10.3969/j.issn.1674-0696.2012.05. 基于 ANSYS 的车桥耦合动力分析 谢秉敏，向中富，王小松，王少怀 (重庆交通大学 土木建筑学院，重庆 400074) 摘要 ：为准确分析车桥之间的相互作 ，根据达朗贝尔原理推导出了车桥系统动力平衡方程。通过位移协调方程及车桥 相互作用联系方程，将车桥两系统耦合起来并通过 ANSYS 实现。数值算例表明，运 基于 ANSYS 车桥耦合动力分析 方法所得结果与利用振型叠加法所得结果吻合良好，表明该方法是正确而有效的，可用于分析各种车桥耦合振动问题。 关 键 词 ：车桥耦合；振动；数值算法；ANSYS 中图分类号：U441.3 文献标志码：A 文章编号：1674-0696（2012 ）05- Dynamic Analysis Method of Vehicle-Bridge Coupling Based on ANSYS Xie Bingmin, Xiang Zhongfu, Wang Xiaosong, Wang Shaohuai (School of Civil Engineering Architecture, Chongqing Jiaotong University, Chongqing 400074, China) Abstract: To analyze the dynamic interaction between bridge and vehicle accurately, the dynamic balance equation of vehicle-bridge coupling system is deduced by the D’Alembert method. By coupling of vehicle vibration and bridge vibration with compatibility equ- ation of displacement and contact equations of vehicle-bridge interaction, equations of vehicle-bridge coupled vibration are established and implemented with ANSYS. The results are identical to those from superposition method of vibration mode, and it proves that the algorithm is valid and effective enough to analyze the vehicle-bridge coupling vibratio