城市污泥固化处理工程技术研发与应用.pdfVIP

第18 卷第6 期 环境卫生工程 Vol．18 No.6 2010 年12 月 Environmental Sanitation Engineering December 2010 ·55 · 城市污泥固化处理工程技术研发与应用 钱春军 （上海老港废弃物处置有限公司，上海 201302） 摘 要：在比较各种固化剂对污泥的固化改性特征的基础上，优化了固化参数，研发了千吨级污泥固化设备。结 果表明：以镁盐为主要成分的M1 固化剂的添加量为5％时，其抗压强度即可达到52 kPa ，而水泥和石灰固化剂添加量 则需在20％ 以上。SEM 分析表明，在污泥固化过程中M1 固化剂与化学污泥中Al、Ca、Fe、Mg 等离子发生胶凝反应后 形成针状、长柱状的晶体，缩短了固化时间，提高固化污泥试样的密实性，促进了其早期强度的发展。示范工程建设 与运行结果表明，M1 固化剂添加比例为10%，养护7 d ，固化污泥即可满足安全填埋作业的土力学特性指标，实现污 泥的安全卫生填埋。 关键词：污泥特性；处理技术；混凝土搅拌；污泥固化成套设备 中图分类号：X703 文献标识码：A 文章编号：1005－8206 （2010）06－0055－04 Development of Engineering Technology of Sewage Sludge Solidification and Its Application Qian Chunjun （Shanghai Laogang Waste Treatment Co., Ltd, Shanghai 201302） Abstract ：Based on comparing modified solidification characteristics of sewage sludge using many kinds of curing agents, solidification parameters were optimized, and thousand-ton-level solidification equipment was developed. The results showed that when the dosage of M1 agent mainly consisted of Mg salts was 5%, the compression strength of sludge would reach 52 kPa, but the dosages of cement and lime were over 20%. SEM analysis showed that during sludge solidification process, M1 agent made a gelatinization reaction with Al, Ca, Fe and Mg ions of chemical sludge to form needle-shaped or columnar-shaped crystal. The M1 agent shortened the solidification time, enhanced the solidity of the solidified sludge, and accelerated to develop its early strength. Construction and operation of demonstration project indicated that when the dosage of M1 agent was 10%, the solidified sludge could meet the demand of soil mechanics for secure landfill after curing 7 days. It can realize secure sanitary landfill of