2BG-2型玉米垄作免耕播种机播种深度数学模型的仿真与验证.pdfVIP

第 31 卷 第 9 期 农 业 工 程 学 报 Vol.31 No.9 2015 年 5 月 Transactions of the Chinese Society of Agricultural Engineering May 2015 19 Simulation and validation of seeding depth mathematical model of 2BG-2 type corn ridge planting no-till planter 1 1 1 1,2 Lin Jing , Qian Wei , Li Baofa , Liu Yanfen (1. College of Engineering, Shenyang Agricultural University, Shenyang 110866, China; 2. College of Mechanical and Electrical Engineering, Qingdao Agricultural University, Qingdao 266109, China) Abstract: No-till planter works in the condition that the ground is covered with residual and straw, so it is important to keep its residue cutting quality and to maintain the stability of seeding depth. Based on 2BG-2 type corn ridge planting no-till planter, complete machine design and forces model of the planter unit were studied. Mathematical model of change of the seeding depth was established, and according to this model, computer simulations were conducted to study the related factors affecting seeding depth stability. Theoretical analysis showed that: in order to keep the seeding depth stability, the spring constant should be increased appropriately, and configuration location of the parts, on the basis of ensuring the necessary mass of system, should have reasonable layout to increase the rotary inertia. Field tests showed that: trends of the theoretical angles over