轧制工艺对帘线钢盘条织构的影晌.pdfVIP

Vol.33 No.8 北京科技大学学报 第 33 卷第8 期 2011 年 8 月 Journal of University of Science and Technology Beijing Aug. 2011 轧制工艺对帘线钢盘条织构的影晌 崔怀周1 )囚 陈伟庆1 ) 毛卫民2) 曹长发3) 张启柱3) 1)北京科技大学冶金与生态工程学院，北京 100083 2) 北京科技大学材料科学与工程学院，北京 100083 3) 青岛钢铁控股集团有限责任公司技术中心，青岛 266043 因通信作者，E-mail: x!fdcu@ 摘 要 采用 X 射线衍射法对国内外四家钢厂帘线钢盘条的织构进行了对比研究.结果表明，国内外各钢厂盘条的织构存在 明显差异，国内盘条轴向上的 11111 织构强度大于国外盘条，然而盘条轴向上的 11111 织构是硬取向，不利于盘条的拉拔.通 过延长加热炉加热时间、提高加热温度和提高吐丝温度，可以使11111 织构的强度明显降低. 关键词 帘线钢;织构;拉拔;车L制 分类号 TG 115.22 Effects of rolliog processes 00 textures of wires for tire cord steel 1 3 3 CUI Huai-zhou ) 函 ， CHEN Wei-qing叶 ， MAO W臼-mir户 ， CAO Chαng-fa ) , ZHANG Qi-zhu ) 1) School of Metallurgical and Ecological Engineering , University of Science and Technology Beijing , Beijing 100083 , China 2) School of Materials Science and Engineering , University of Science and Technology Beijing , Beijing 100083 , China 3) Technology Center , Qingdao Iron Steel Co. Ltd. , Qingdao 266043 , China 因Corresponding author , E-mail: xlfdcu@ ABSTRACT XRD analysis was used to compare the textures of tire cord steel produced from four different steel works at home and abroad. The results show that the textures of wire rods produced at domestic and foreign works are obviously different. The strength of 1111 1 texture in the axis of wire rods produced at domestic works is stronger than that at foreign works , however 1111 1 texture in the axis of wire rods has strong orientation , which is adverse to wire drawi吨. The strength of 1111 1 texture can be obviously decreased by prolonging the heating time of heating furnaces and increasing the heating and laying