Material Discriminated X-Ray CT英文资料.pdfVIP

2007 IEEE Nuclear Science Symposium Conference Record N24-58 Material Discriminated X-Ray CT by Using Conventional Microfocus X-Ray Tube and CdTe Imager Y. Onishi, T. Nakashima, A. Koike, H. Morii, Y. Neo, H. Mimura, T. Aoki Research Institute of Electronics, Shizuoka University, Hamamatsu, Japan Abstract–Material discriminated X-ray CT system has been photon counting type detector that can obtain intensity constructed by using conventional micro-focused X-ray tube information with energy information of X-ray. A white (small white X-ray source) and photon counting type CdTe X-ray spectrum of an X-ray tube can be treated as polychromatic imager with energy-band discriminate function. We have already X-rays by the detector of the energy distinction type. reported material identify X-ray CT using K-shell edge data. In Therefore, the image including energy information can be this report the principle of material discrimination was adapted constructed. In this experiment, the material was discriminated the separation of electron-density and atomic number from attenuation coefficient mapping in X-ray CT reconstructed image by using dual energy X-ray CT (DXCT) method. DXCT is a in dual energy X-ray CT method. The dual energy X-ray method method of obtaining an atomic number and an electron density was obtained good electron-density mappings by using two fro