【毕业论文】红防盗报警系统的设计.docVIP

红外防盗报警系统的设计 目 录 摘 要 1 Abstract 1 1. 绪论 2 1.1 防盗报警系统的发展概况 2 2. 红外防盗报警器简述 2 2.1 引言 2 2.2 基础知识介绍 2 2.3.1 常见的几种红外传感器介绍 3 2.3.2热释电红外传感器的原理 5 2.3.3 PIR的原理特性 6 3 方案设计 6 3.1 总体设计思路 6 3.2设计任务及要求 7 3.3具体电路模块设计 7 3.3.1 放大电路的设计 7 3.3.2 时钟电路的设计 7 3.3.3 复位电路的设计 9 3.3.4 发光二极管报警电路的设计 9 3.3.5 声音报警电路的设计 10 3.4 系统硬件电路的选择及说明 10 3.5 软件仿真 10 3.6 软件的程序实现 10 3.6.1 主程序工作流程图 11 3.6.2设计编程程序 12 4. 设计总结 14 参考文献 15 致谢 16 附录一 单片机控制的红外防盗报警器 17 附录二 Proteus仿真原理图 18 红外防盗报警系统的设计 摘 要：随着时代的不断进步 ,很多小区都安装了智能报警系统 ,有效的保证了居民人身财产安全.本系统采用了热释电红外传感器，它的制作简单、成本低、安装比较方便，而且防盗性能比较稳定，抗干扰能力强、安全可靠。本红外线防盗报警系统由热释电红外传感器、报警器、单片机控制电路、LED控制电路及相关的控制管理软件组成。用户终端完成信息采集、处理、数据传送、功能设定、本地报警等功能。终端由中央处理器、输入模块、输出模块、通信模块、功能设定模块等部分组成。本设计就是为了满足现代住宅防盗的需要而设计的家庭式电子防盗系统。： The design of infrared ray alarm system Yong Wu (Hunan Institute of the Humanities Science and Technology Hunan Loudi 417000) Abstract：system having been set in housing estates, obviously, they guarantee the person and belongs effectively. The system adopts pyroelectric infrared ray sensor which is made simply, cost lowly, install conveniently, what’s more, the system has steady prevention of thievery and interference, great sensibility and reliability. The infrared ray alarm system is made up of pyroelectric infrared ray sensor, single-chip microcomputer control circuit, LED control circuit and the relative control manage software. The function that collecting information, handling information, sending data, setting up features, making alarm natively is used by user terminal. In addition, the user terminal is made up of CPU, input modules, output modules, communication modules, function-set modules and so on, while CPU adopts 51 size single-chip AT89C51, and all parts of the system are working under the control of system software. The design of this experiment is a household electric alarm system, which have the aim of satisfying the people’s need of housing prevention. So this thesis that is based on single-chip to put an infrared ray alarm system have great rese