基于单片机的简易计算器制作.doc

基于51单片机的简易计算器制作 一：#includereg52.h #define Lint long int #define uint unsigned int #define uchar unsigned char sbit dula=P2^6; //锁存器段选 sbit wela=P2^7; sbit display_g=P2^0; //负号段选 sbit display_w=P2^1; //负号位选 uchar code table[]={0x3f,0x06,0x5b,0x4f, //0,1,2,3 0x66,0x6d,0x7d,0x07, //4,5,6,7 0x7f,0x6f,//0x77,0x7c, //8,9 //0x39,0x5e,0x79,0x71 }; //数码管段码表 uchar code table1[]={0x7f,0xbf,0xdf,0xef, 0xf7,0xfb,0xfd,0xfe }; //数码管位码表 /****************定义全局变量*******************/ Lint store[2]={0}; //存取按键值和结果的数组 uchar flag_op=0; //+,-,*,/操作符标志符 uchar flag_order=0; //输入数的顺序标志符 uchar flag_equal=0; //等于号标志符 uchar key=16; //按键值 /*****************延时函数*********************/ void delay(uint x) { uint i,j; for(i=x;i0;i--) for(j=110;j0;j--); } /****************显示函数*********************/ void display(Lint temp) { uint buf1,buf2,i=0; buf1=temp if(buf1=10||temp-9999999) //数据溢出，显示错 { display_w=1; //关负号位选 dula=1; P0=0x3f; dula=0; P0=0xff; wela=1; P0=0x00; wela=0; delay(1); } else if(temp0temp= //显示负数 { display_w=0; //开负号位选 temp=-temp; do { buf2=temp%10; dula=1; P0=table[buf2]; dula=0; P0=0xff; wela=1; P0=table1[i]; wela=0; i++; P0=0x00; temp=temp/10; delay(1); }while(temp!=0); } else { display_w=1; //关负号位选 do { dula=1; buf2=temp%10; P0=table[buf2]; dula=0; P0=0xff; wela=1; P0=table1[i]; wela=0; i++; P0=0x00; temp=temp/10; delay(1); }while(temp!=0); } } /******************键盘扫描函数******************/ uchar KeyScan() { uchar temp; P3=0xfe; //扫描第一行 temp=P3; temp=temp0xf0; if(temp!=0xf0) { delay(5); P3=0xfe; temp=P