模具专业英语 王浩钢 14456第5章新.pptVIP

Lesson 5  Sprue Bush and Register Ring 　　The sprue bush is defined as that part if the mould in which the sprue is formed. 　　In practice the sprue bush is the connecting member between the machine nozzle and the mould face, and provides suitable aperture through which the material can travel on its way to the impressions or to the start of the runner system in multi-impression moulds. 　　The sprue bush is fairly highly stressed in some applications and should therefore be made from a 　nickel chrome steel and should always be hardened. 　　Note that while initially the nozzle m