Callfortenders.pdf-MyCourses.PDFVIP

Call for tenders Guide to ”request for quotation” Shortly You provide all the needed information that foundry need that they can make you offer how much it is going to cost to produce your product. The foundry relay the calculations on your information, so the more you can provide the information the more specific offer you will get. What there should be at least • Name of your company (and contact details) • Short description of what you are looking for • How many products you will need – when are you going to need the products • What is the material for your product – What standard it is based on • What are the tolerances – What standard it is based on • How you will proceed with the tools • How the products should be inspected that the basic requirements are met – What is standard it is based on • Other needed information • Drawings Example Additional requirements • The foundry is able to make castings in such a way that basic requirements are met (based on the standards), but it may not be enough. The test piece gives an indication of the casting mechanical characteristics, but only references. Critical properties are defined in the order specifically the so-called additional requirements. Additional requirements • Additional requirements should be recorded clearly and unambiguously as possible. • What is the required feature and how it will be tested. – If there is a standard for testing, reference is made to it. • Use the test samples if you want to find out that additional requirements have been met. • Open and honest communication through the process of both parties save time and money. • The foundry Guidelines should be taken into account. – There might be problems that can not be solved in any other way than by modifying the construction.