SpecialSteels-SAIL.PDFVIP

Special Steels Alloy Steels Plant Billet Products RCS Blooms (mm) : 160, 180, 195, 200, 218, 240, 250, 287, 300, 340 and 300 x 400 Length : 2 to 6 M with 10% shorts down to 1 M RCS Billets (mm) : 95, 100, 110, 125, 140 and 150 Length : 4 to 6 M with 10% shorts down to 1 M A/F Billets (mm) : 96, 100, 105, 120, and 140 Length : 4 to 6 M with 10% shorts down to 1 M Rounds (mm) : 80, 90, 95, 100, 105, 110, 117, 120, 125, 131, 135,140, 145, 150, 160, 170, 180, 190 and 200 Length : 4 to 6 M with 10% shorts down to 1 M Square Flats : Min. thickness - 80 mm Min. width - 120 mm Max. thickness - 125 mm Max. width - 250 mm Flat 60 x 220 and 65 x 195 can also be rolled with bulging edges. Any other special sizes may be developed on request. Plate Products Hot Rolled Plates Grade : Hadfield Thickness (mm) Width (mm) Length (mm) 6, 8, 900 to 1100 1800 to 2500 10, 12 1000 to 1300 2000 to 3500 16 1000 to 1320 1800 to 2200 20, 25 1000 to 1320 1500 to 1800 30 1000 to 1320 1100 to 1200 Other sizes can be done after contract review. Forged products Die Blocks Max. width : 460 mm Min. thickness : 100 mm For Rounds (Dia) : 100 mm to 500 mm Max cross - sectional area : 1,84,000 sq.mm Max. weight : Single piece forging 6.4 MT Other sizes can be done after contract review. Rounds Hammer Produc