欧洲螺栓标准(EN bolt standards).doc

欧洲螺栓标准(EN bolt standards) ANSI　|　?BS　|　?DIN　|　?EN　|　?GB　|　?ISO　|　?JIS　|　?NF　|　?DIC 编号 中文名称 英文名称 EN 13411-5-2003 钢丝绳终端设备 安全性 第5部分：U型螺栓丝夹 Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips EN 1450-1996+A1-1998 塑料管道系统 玻璃增强热固塑料(GRP)组件 螺栓法兰连接的设计查验试验方法 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of bolted flange joints EN 1515-1-1999 法兰和其连接件 螺栓连接 第1部分：螺栓连接的选择 Flanges and their joints - Bolting - Part 1: Selection of bolting EN 1515-2-2001 法兰和其连接件 螺栓连接 第2部分：PN钢法兰用螺栓材料的分类 Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated EN 1665-1997+AC-1998 六角法兰螺栓 重型系列 Hexagon bolts with flange - Heavy series EN 20225-1991 紧固件 螺栓、螺柱和螺母 尺寸代号和标注 Fasteners; Bolts, screws, studs and nuts; Symbols and designation of dimensions (ISO 225:1983) EN 20273-1991 紧固件 螺栓和螺钉用通孔 Fasteners; Clearance holes for bolts and screws (ISO 273:1979) EN 20898-7-1995 紧固件机械性能 第7部分：螺栓与螺钉的扭矩试验和最小扭矩公称直径1MM—10MM Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm (ISO 898-7:1992) EN 2357-1988 航空航天系列 操纵缆绳上锻制耐腐蚀钢柱头螺栓端 尺寸和负载 Aerospace series - Stud-ends in corrosion resisting steel swaged on type, control cable - Dimensions and loads EN 24015-1991 六角头螺栓 产品等级B级 细杆(杆径近似等于中径) Hexagon head bolts; Product grade B; Reduced shank (shank diameter = pitch diameter) (ISO 4015:1979) EN 2413-1995 航空航天系列 镀镉合金钢制肩薄六角头高精度公差柄短螺纹螺栓 分类：1100MPa(在环境温 度下)/235 Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235℃ EN 2549-1995 航空航天系列　阳极氧化MOS2润滑的钛合金制普通六角头紧公差标准柄短螺纹螺栓　等级：1100MPa（环境温度）/ Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS(Index)2 lubricated - Classification: 1100 MPa (at ambient tempe