火炬臂热喷铝方案.docVIP

SHENZHENG JUTAL MACHINERY EQUIPMENT CO., LTD. Issue Dept. Engineering Department Thermal Spray Aluminum Procedure For GLYCOL REGENERATION PACKAGE PROJECT 0 MAY 17.07 ISSUED FOR APPROVAL Linesen Rev. No. Date Description Prepared By Reviewed By Approved By Accepted By Status Client: PETRRECO INTERNATIONAL LTD. Project Title: GLYCOL REGENERATION PACKAGE Project No.: Scale: Document Number: Sheets: J428 A4 J428-PR-001(2) CONTENTS 1. General 2. Work Description 3. Applicable Standard and Specification 4. Materials 5. Painting Procedure 6. Quality Control Appendix-A Painting System Appendix-B Paint Product Data 1. General This Painting Procedure defines the general painting requirements and practices for GLYCOL REGENERATION PACKAGE PROJECT. JUTAL’s painting scope include painting material procurement, sandblasting and painting work. 2. Work Description 2.1 Description All fabricated steel members which shall be coated should be received girt blasting and shop painting on JUTAL’s workshop for grit blasting and painting upon the requirement of painting specification. 2.2 Duration Strongly comply with client’s requirements. 3. Applicable Standard and Specification The following Standards and Client’s Specification shall be used in this project: 3.1 Client’s Specification I-ET-3010.00-1200-940-PPC-001 3.2 Steel structures Painting Council (SSPC) SSPC-SP-1, “Solvent Cleaning “ SSPC-SP-2, “Hand Tool Cleaning” SSPC-SP-3, “Power Tool Cleaning “ SSPC-SP 5, “White Metal Blast Cleaning” SSPC-SP-7, “Brush off Blast Cleaning “ SSPC-SP-10, “Near-White blasting Cleaning “ DIN 8566/2(1984), “Zusatze fur das thermische Spritzen.” ISO 8501, “Preparation of steel substrates before application of paint and related products – visual assessment of surface cleanliness.-PART 1: Rust grades and preparation grades of uncoated steel substrates after overall