GZS7型钻屑输送机输送链受力分析及计算.pdfVIP

石油大学学报990315 石油大学学报 JOURNAL OF THE UNIVERSITY OF PETROLEUM,CHINA 1999年 第23卷 第3期 vol.23No.3 1999 GZS7型钻屑输送机输送链受力分析及计算 王奎升　刘来福　李艳丽 摘要：采用逐点张力法对钻屑输送机所用链条各部位的受力情况进行了分析，给出了钻屑输送机所 用链条的张力计算公式，为校核链条的强度及计算钻屑输送机所需功率提供了依据。依照这些公 式，计算了钻屑输送机在各种倾角下的链条张力和最大张力。计算结果表明，链条的使用安全系数 达到了14，可保证输送机的安全使用。 关键词：钻屑；输送机；链条；张力；计算 中图分类号：TE 929　　　文献标识码：A ANALYSIS AND COMPUTATION OF TENSION OF CONVEYOR CHAIN IN CONVEYING DEVICE OF MODEL GZS7 FOR DRILLING CUTTINGS Wang Kuisheng ，Liu Laifu and Li Yanli //1999,23(3):53～56 A new machine of medel GZS7 is invented to convey the drilling cuttings. The forces in all parts of conveyor chain used in this machine are analyzed. The formulae for calculating the tension of the conveyor chain are presented. Based on these formulae, the tension and the maximum tension of conveyor chain working on different slope angles are computed. The safety factor of the chain is 14, which exceeds the necessary safety factor. The chain is very safe. Key words: drilling cuttings; conveying device; conveyor chain; tension; computation About the first author: Wang Kuisheng was graduated from East China Petroleum Institute in 1982 and gained Ph.D degree in 1998. Now he is engaged in teaching and research on oilfield machinery and equipment in the University of Petroleum, China(Beijing: 102200). 1　GZS7型钻屑输送机性能 　　GZS7型钻屑输送机属链式刮板机，可以输送多种物料（粉末、块状、腐蚀性和湿料等），工艺 布置较灵活，比较适合输送粘度大、湿度大、腐蚀性强的流质状钻屑。它克服了带式机皮带打滑、 腐蚀老化及运转跑偏等缺点，也克服了螺旋式输送机输送轴与料槽、物料之间存在磨损、功率损耗 大及输送距离短等缺点。 　　GZS7型钻屑输送机的主要性能参数如下：最大输送距离为7 m；输送速度为0.2～0.4　m/s;输送 3 /h；起升角度为0～45°；起升高度为4～5 m；水平摆角为±30°；公称宽度为0.3～0.4 量为2～10 m m。其示意图见图1。 万方数据 file:///E|/qk/sydxxb/sydx99/sydx9903/990315.htm（第 1／7 页）2010-3-23 8:11:15 石油大学学报990315 图1　钻屑输送机示意图 2　输送链张力