VSC-MTDC控制系统的参数优化及柔性调整策略.pdfVIP

第39 卷 第2 期 电 网 技 术 Vol. 39 No. 2 2015 年2 月 Power System Technology Feb. 2015 文章编号：1000-3673 （2015 ）02-0380-07 中图分类号：TM 744 文献标志码：A 学科代码：470·4051 VSC-MTDC 控制系统的参数优化及柔性调整策略 王松，李庚银，周明 （新能源电力系统国家重点实验室(华北电力大学) ，北京市 昌平区 102206 ） Parameter Optimization and Soft Regulation Strategy of VSC-MTDC Control System WANG Song, LI Gengyin, ZHOU Ming (State Key Laboratory of Alternate Electrical Power System With Renewable Energy Sources (North China Electric Power University), Changping District, Beijing 102206, China) ABSTRACT: Since the voltage source converter based multi HVDC system based on voltage source converter，VSC-MTDC) terminal HVDC (VSC-HVDC) transmission system possesses 系统具有有功功率、无功功率四象限独立控制、多电源供电、 such advantages as independent control of active and reactive 多落点受电，可连接无源网络等特点，近年来受到广泛关注。 power in four quadrants, enable to be connected with multi VSC-MTDC 控制器的参数决定了其控制系统的控制能力， power sources and multi receiving ends, enable to be connected 从而决定了系统的运行特性，而试凑法得到直流输电系统的 with passive network and so on, it attracts extensive attentions. 控制参数不能保证系统良好的运行特性，提出了 The control ability of VSC-MTDC controller depends on the VSC-MTDC 系统运行特性的评价指标，并以其作为单纯形 parameters of its controller, thus the operating characteristics of 法的目标函数对控制系统参数优化，从而保证 VSC-MTDC VSC-HVDC transmission system is correspondingly 系统具有良好的运行特性。同时，VSC-MTDC 系统的调整 determined. The operating characteristics of VSC-HVDC 策略决定了调整过程中系统的运行特性，较大的目标值调整 transmission system cannot be ensured by the control 会导致系统电气量的剧烈波动和较长的调整时间，不利于系 parameters achieved by cut-and-try process method, so the 统稳定和设备安全，据此