分布式供电系统源变换器输出阻抗研究_8.pdfVIP

航空电源航空科技重点实验室学术年会(APSC’2006)论文集 分布式供电系统源变换器的输出阻抗的研究 吴涛，阮新波 （南京航空航天大学，江苏 南京 210016） Output Impedance Analysis of Source Converters in the DC Distributed Power System WU Tao, RUAN Xin-bo (Nanjing University of Aeronautics Astronautics, Nanjing, China) ABSTRACT: The preferable implementation method 化研究的对象。本文以分布式供电系统中常见的移相 for building large-scale distributed power systems is to 全桥 DC-DC 变换器为例，对输出阻抗进行了模型验 integrate power modules. US Navy’s contribution to 证，并详细分析了输出阻抗的特点。为了便于将来制 system integration is that they propose and implement 定出 Buck 类 DC-DC 模块的输出阻抗的标准，通过 PEBB concept at the modular level. This paper presents 实验揭示了移相全桥 DC-DC 变换器的输出阻抗随功 a novel concept for the system integration at the system 率等级、开关频率和控制方式变化时的规律。 level, which is to select the output impedance of the 关键词：输入/输出阻抗；分布式供电系统；源变换 source converter and the input impedance of the load 器；稳定性分析；标准化 converter as objects of standardization. For facilitate issuing the output impedance of buck-type dc-dc 1 引言 converters in the future, the characteristics of the output 分布式供电系统具有可靠性高、易于实 impedance of the frond-end phase-shifted dc-dc 现模块化和便于维护等优点，已经在计算机 converter are modeled and analyzed in detail. The 供电系统、舰船供电系统和航空电源供电系 influence of three factors including the output power 统中得到广泛应用[1] 。在分布式供电系统中， rating, the switching frequency and the control-mode on 最常见的结构是多个功率变换模块的级联。 the output impedance are verified by experimental