Power generation with laterally-packaged piezoelectric fine.pdfVIP

Supplementary materials Power generation with laterally-packaged piezoelectric fine wires Rusen Yang 1, Yong Qin 1, Liming Dai 2 and Zhong Lin Wang 1, * 1 School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta GA 30332-0245 USA 2 Department of Chemical and Materials Engineering, School of Engineering, University of Dayton, Ohio 45469, USA * To whom correspondence should be addressed. E-mail: zlwang@gatech.edu b a 200 µm 30 µm c 20 µm Figure. S1 | a, b Low- and high-magnification SEM images of ZnO fine-wires used for fabricating AC generators. b, An SEM image of a fabricated AC generator supported by a Kapton polyimide film. Total Total generated generated Peaks of charge when charge when output current fast stretched -11 fast released (C x 10 ) -11 (C x 10 ) First 1.49 -1.88 Table S1 | Total charge generated when the SWG was fast stretched Second 1.73 -1.87 and fast released by integrating the area of the peak in the I-t curve Third 1.76 -1.86 shown in Fig. 2a. The negative Fourth 1.74 -1.94 s