叶栅形状变化对自发凝结影响的数值研究.pdfVIP

第29 卷 第35 期 中 国 电 机 工 程 学 报 Vol.29 No.35 Dec. 15, 2009 2009 年12 月15 日 Proceedings of the CSEE ©2009 Chin.Soc.for Elec.Eng. 125 0258-8013 (2009) 35-0125-06 TK 261 A 470 30 文章编号： 中图分类号： 文献标志码： 学科分类号： ⋅ 叶栅形状变化对自发凝结影响的数值研究 王智，安连锁，韩中合 ( 电站设备状态监测与控制教育部重点实验室(华北电力大学) ，河北省 保定市 071003) Numerical Study on Impacts of Blade Profile Modification on Homogeneous Condensation WANG Zhi, AN Lian-suo, HAN Zhong-he (Key Laboratory of Condition Monitoring and Control for Power Plant Equipment (North China Electric Power University), Ministry of Education, Baoding 071003, Hebei Province, China) ABSTRACT: The spontaneous nucleation flow in a turbine 0 引言 cascade was numerically studied. The model was implemented 汽轮机中的湿蒸汽流动会引起效率降低和水 within a full Navier–Stokes viscous flow solution procedure, and the process of condensation was calculated by the 蚀，设计高效安全的湿蒸汽级叶片成为提高汽轮机 quadrature method of moments. Results shows in wet steam 经济性和安全性的重要课题。汽轮机中的湿蒸汽流 flow, degree of boundary layer separation is greater than in 动通常在跨音速流动条件下发生，凝结产生的压力 superheated steam flow and the loss can’t be neglected. The [1] [2] [3] 突跃、热阻塞 、气动激波 、边界层分离 及非定 impacts of blade profile modification on nucleation and degree 常流动[4]等现象使得湿蒸汽两相流动非常复杂。由 of boundary layer separation were numerical studied. The 于实验中对液相重要参数如湿度、水滴半径、水滴 liquid phase parameter distribution is sensitive to the suct