中空纤维膜直管和螺旋管内烟尘沉积的模拟.pdfVIP

第 30 卷 第 35 期 中 国 电 机 工 程 学 报 Vol.30 No.35 Dec.15, 2010 38 2010 年 12 月 15 日 Proceedings of the CSEE ©2010 Chin.Soc.for Elec.Eng. 0258-8013 (2010) 35-0038-05 X 701.3 A 470 20 文章编号： 中图分类号： 文献标志码： 学科分类号： ⋅ 中空纤维膜直管和螺旋管内烟尘沉积的模拟 陈迁乔，钟秦 (南京理工大学化工学院，江苏省 南京市 210094) Numerical Simulation of Particles Deposition in Straight and Helical Hollow Fibre Membrane Tube CHEN Qianqiao, ZHONG Qin (School of Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, Jiangsu Province, China) ABSTRACT: The deposition performance of the particles in 关键词：颗粒沉积；中空纤维膜；螺旋管；计算流体力学 straight and helical hollow fiber membrane tube were 0 引言 simulated by calculation fluid dynamic (CFD) with the particles diameter 0.05~3 μm. The flue gas and particle were 在实际的工业生产中，即使经效率很高的袋式 simulated by using laminar model and discrete phase model 除尘器除尘，烟气中还包含有少量的微米级和亚微 respectively. The result shows that the deposition rate is low in 米级的烟尘颗粒物[1-2] 。膜吸收法烟气脱硫在实际应 straight tube and is high in helical tube. The deposition rates 用中不可避免会遇到膜污染问题。烟尘颗粒物在膜 are 0.53% and 0.89% respectively for 0.1 μm and 1 μm 管中的沉积属于多相流问题，很难用实验准确的模 particles in straight tube when the gas velocity is 10m/s, but the 拟出实际工况。近年来，随着计算流体力学 deposition rates are more than 90% in helical tube under the (calculation fluid dynamic，CFD) 的迅速发展，人们 same operation conditions. The deposition rate