a parallel adaptive mesh method for the numerical simulation of multiphase flows：多相流数值模拟的并行自适应网格法.pdf

Computers Fluids 87 (2013) 115–131 Contents lists available at SciVerse ScienceDirect Computers Fluids journal homepage: /locate/compfluid A parallel adaptive mesh method for the numerical simulation of multiphase flows Joseph M. Rodriguez a,b, Onkar Sahni b, Richard T. Lahey Jr. c, Kenneth E. Jansen d,⇑ a Lockheed Martin – KAPL, Inc., P.O. Box 1072, Schenectady, NY 12309, USA b Scientific Computation Research Center, Rensselaer Polytechnic Institute, 110 8th St., Troy, NY 12180, USA c Center for Multiphase Research, Rensselaer Polytechnic Institute, 110 8th St., Troy, NY 12180, USA d University of Colorado Boulder, UCB 492, Boulder, CO 80309, USA a r t i c l e i n f o a b s t r a c t Article history: Methodology for performing large scale parallel numerical simulations of two-phase flow is presented Received 19 April 2012 that uses a three-dimensional (3-D) finite element method (FEM) solver, PHASTA, to perform the simu- Received in revised form 30 March 2013 lation and a parallel mesh adaptation code, phParAdapt, to iteratively refine and coarsen regions of the Accepted 1 April 2013 solution domain. This version of PHASTA uses a stabilized FEM to discretize the 3-D Incompressible Available online 18 April 2013 Navier–Stokes (INS) equations plus a level set method to capture the two-phase interface. The phPar- Adapt code takes the current parallel mesh along with the PHASTA flow solution and, using var