智能交流接触器一体化仿真及其数字控制技术.pdfVIP

第 35 卷 第 11 期 中 国 电 机 工 程 学 报 Vol.35 No.11 Jun.5, 2015 2870 2015 年 6 月 5 日 Proceedings of the CSEE ©2015 Chin.Soc.for Elec.Eng. DOI ：10.13334/j.0258-8013.pcsee.2015.11.027 文章编号：0258-8013 (2015) 11-2870-09 中图分类号：TM 572 智能交流接触器一体化仿真及数字控制技术 许志红，汤龙飞 (福州大学电气工程与自动化学院，福建省 福州市 350116) Co-simulation and Digital Control Technology of the Intelligent AC Contactor XU Zhihong, TANG Longfei (School of Electrical Engineering, Fuzhou University, Fuzhou 350116, Fujian Province, China) ABSTRACT: A brand-new simulation method for the 开发了智能交流接触器电流闭环数字控制模块，并进行相关 intelligent AC contactor was proposed. The simulation method 实验，验证了一体化仿真及数字控制的有效性。 integrated the SPICE simulation of the control module with the 关键词：智能交流接触器；一体化仿真；逐点闭环；数字变 dynamic simulation of the contactor and realized the 流；电流闭环 closed-loop point-by-point co-simulation between the intelligent control module and the AC contactor. The 0 引言 underlying hardware circuit of the intelligent AC contactor can be designed in Multisim. And the dynamic model of AC 交流接触器广泛应用于电动机控制、电气传动 contactor can be designed in LabVIEW. In addition, a two-way 及自动控制等领域，传统的电磁式交流接触器存在 data channel has been built between Multisim and LabVIEW. 触头弹跳严重、功耗大、噪声大、工作电压范围窄 Both of the softwares perform the nonlinear time-domain 等不足。近年来，接触器的智能化技术发展迅速， simulation simultaneously and independently, and exchange 研究人员主要提出了如下控制方案：文献[1-2]提出 data at the end of each simulation time step so as to realize the 了接触器的PWM 智能控制方案，以线圈电流作为 co-s