矩形通道中斜截半椭圆柱面传热和流阻数值模拟.pdfVIP

第31 卷 第17 期 中 国 电 机 工 程 学 报 Vol.31 No.17 Jun.15, 2011 72 2011 年6 月15 日 Proceedings of the CSEE ©2011 Chin.Soc.for Elec.Eng. 0258-8013 (2011) 17-0072-07 TK 172 A 470 10 文章编号： 中图分类号： 文献标志码： 学科分类号： ⋅ 矩形通道中斜截半椭圆柱面传热和流阻数值模拟 高猛，周国兵 (华北电力大学能源动力与机械工程学院，北京市 昌平区 102206) Numerical Simulations on Heat Transfer and Flow Resistance of Oblique-cut Semi-elliptic Cylinder Shell in Rectangular Channel GAO Meng, ZHOU Guobing (School of Energy Power and Mechanical Engineering, North China Electric Power University, Changping District, Beijing 102206, China) ABSTRACT: Three-dimensional numerical simulations were 攻角β 、高度h 、距入口间距S 、前缘间距s 、布置方式对其 carried out to investigate heat transfer and fluid flow 在通道内强化传热和流阻综合性能的影响。结果表明，在计 characteristics of a pair of single row oblique-cut semi-elliptic 算条件下，α 20º 、β 15º、h 5 mm、S 100 mm、s 30 mm、 cylinder shells in a rectangular channel. The Reynolds number 渐扩式布置(前缘低后缘高、凹面相对) 的斜截半椭圆柱面在 (Re) of air flow ranged from 7000 to 26800. The oblique angle 通道内的强化传热和流阻综合性能最好。斜截半椭圆柱面在 α, angle of attack β, height h, distance from the entrance S, 通道内产生的端部涡系对其强化通道内传热和流体流动结 spacing of two leading edges s and configuration of the 构的改变发挥了重要作用。 oblique-cut semi-elliptic cylinder shells were considered. The 关键词：强化传热；流动阻力；数值模拟；斜截半椭圆柱面； dimensionless number R was used to analyze the effects of 涡流发生器 these six p