空冷汽轮发电机冷却气流风量对定子内流体的影响.pdfVIP

第 29 卷 第 21 期 中 国 电 机 工 程 学 报 Vol.29 No.21 Jul. 25, 2009 2009 年 7 月 25 日 Proceedings of the CSEE ©2009 Chin.Soc.for Elec.Eng. 53 0258-8013 (2009) 21-0053-09 TM 311 A 470 40 文章编号： 中图分类号： 文献标志码： 学科分类号： ⋅ 空冷汽轮发电机冷却气流风量 对定子内流体的影响 李伟力，杨雪峰，顾德宝 (哈尔滨理工大学电气与电子工程学院，黑龙江省 哈尔滨市 150040) Influence of Air Current Flow Change on Fluid Flow and Heat Transfer of Air-cooled Turbo-generator With Multipath Ventilation LI Wei-li, YANG Xue-feng, GU De-bao (School of Electrical and Electronic Engineering, Harbin University of Science and Technology, Harbin 150040, Heilongjiang Province, China) ABSTRACT: The mathematical and physical models for the 及电机各部分温度空间分布特性的影响。结果表明，适当增 3-D fluid and temperature coupling analysis of the stator 加气隙风量，会降低电机定子最高温度，还会降低电机定子 multipath ventilation system for large air-cooled 最高温度与最低温度的温差。最后，以 200 MW两级大容量 turbo-generators are established according to the characteristics 空冷汽轮发电机为例进行计算，将计算结果与实测结果进行 of fluid-flow and heat-transfer. Meanwhile, the corresponding 比较分析，证明该方法的准确性。 boundary conditions under some assumptions were given. The 关键词：空冷汽轮发电机；多风路通风系统；耦合场；三维 control equations of the stator 3-D fluid and temperature fields 流体场；三维温度场 are coupling calculated numerically by using the finite volume method (FVM). Then keeping the total input air invariant, the 0 引言 influence of changing the air volume in the stator and air gap