考虑局部磁滞损耗的复合电机铁损耗计算.pdfVIP

第 34 卷 第 30 期 中 国 电 机 工 程 学 报 Vol.34 No.30 Oct.25, 2014 2014 年 10 月 25 日 Proceedings of the CSEE ©2014 Chin.Soc.for Elec.Eng. 5395 DOI ：10.13334/j.0258-8013.pcsee.2014.30.017 文章编号：0258-8013 (2014) 30-5395-06 中图分类号：TM 351 考虑局部磁滞损耗的复合电机铁损耗计算 龚宇，崔巍，章跃进 (上海大学机电工程与自动化学院，上海市 闸北区 200072) Iron Loss Calculation of Compound Motors Considering Minor Hysteresis Losses GONG Yu, CUI Wei, ZHANG Yuejin (School of Mechatronical Engineering and Automation, Shanghai University, Zhabei District, Shanghai 200072, China) ABSTRACT: Magnetic geared motors (MGM) have much [1] 于磁场调制原理的高性能同心式磁性齿轮 ，关键 more complicated structures and magnetic circuits than 之处在于内外转子之间引入了调磁铁心，使得少极 common permanent magnet sychronous motors. Effective 数转子产生的高速旋转磁场经过调磁铁心调制后， analysis of iron losses becomes very important to design and 在外气隙中形成与多极数外转子相同极对数的低 optimize this kind of machines. A magnetic geared motor was designed and analyzed using time stepping finite element 速谐波磁场，从而实现稳定的低速大转矩输出。由 method. Iron losses including minor hysteresis losses were 于所有磁钢同时参与作用，该磁性齿轮与传统内外 calculated through analyzing the history of inductions in each 啮合式磁性齿轮相比，转矩密度大大提高，能够与 element. The rain flow counting algorithm (RFCA), which is 机械齿轮相媲美，同时又具有机械齿轮所不具备的 usually empolyed to estimate mechanical stress and endurance, 无润滑、无接触、自保护等优点，因而近年来得到 was used to count the amplitudes of closed minor loops. A two-stage no-load test was carried out and t