7第七章加工制作技术方案及生产组织计划.docVIP

第七章加工制作技术方案及生产组织计划 Chapter seven Processing production technology plan and production plan 第一节利用专业工厂加工半成品、减少现场制作量 The first period Use professional factory processing semi-finished products, reduce the production quantity 本工程由于质量要求较高，工期紧，能够在专业工厂加工成半成品或成品的构件我方尽量要专业厂家定做，在加工制作过程中由专业工程师进行监控。例如玻璃、铝板、不锈钢、栏杆、扶手、门、隔断、木线、木门等在专业厂家定做好、油漆好、包装好，再到现场安装； The project quality due to the demand is higher, short construction period, can in the professional factory processed into semi-finished or finished products member we try to be professional manufacturer to have something made to order, in the processing production process by monitoring professional engineers. Such as glass, aluminum, stainless steel, rail, rail, door, partition, wood line, wood, etc in the professional manufacturer will do, paint, packing, and then to the site installation; 第二节装饰材料采用具有一定知名度的品牌 The second period The adornment material with certain fame brand 1.本公司承诺工程施工中使用的所有装饰材料均选用具有一定生产规模和市场信誉好的生产厂和品牌，所有材料均应有合格证和质保书，符合国家规定的技术标准。根据施工技术规范、检验标准需经有关部门检测后方可用于工程中的建筑或装饰材料，必须严格按照规定执行，并向总包单位、建设单位、监理单位提交检验（检测）合格证书。 1. Our company promise to engineering construction using all the decoration materials are choose certain production scale and market reputation good factories and brand, all material shall have a certificate and Quality Guarantee files , in line with the state standards. According to the construction technology standard, testing standard must be approved by the relevant departments of the test can be used in the engineering of construction or decoration materials, must be in strict accordance with the provisions, and to the total package unit, the construction unit, the overseeing unit submit inspection (test) certificate. 2.主要装饰材料须在实际施工需用前提送实物样品，经业主、设计、管理公司、监理、总包确认后方可采购，材料在使用前，应按工程师的要求进行检验或试验，不合格的不得使用。 2. The main decorative materials must be in actual construction premise need send physical samples, the owner, design, management, supervision, the total package confirm rear can purchase, material before use, s