Ultrasonicsystemsforinspectionofseamlesstube,weldedtubeandbar.doc

Ultrasonic systems for inspection of seamless tube, welded tube and bar 无缝管材、焊缝管材、棒材的超声波检测系统 ．．．．．．ultrasonics-low noise 计算机硬件系统基于超声波产品——低噪音 ．applications for ultrasonic inspection require precise high reliability instrumentation. This must be unaffected by the typical factory environment, which can be hot, electrically noisy and dirty. 避免造成缺陷和尺寸公差，为了生产高质量的管材、棒材需要进行连续的监控。用于超声波检测的产品应用软件要求是精确的、高可靠性品的设备仪器。该设备不可以受制造厂周围过热、电动噪声还有污染等特殊的环境影响。 USL’s range of PC-based ultrasonic equipment is specifically designed to meet these needs. In conjunction with automated material handling units from USL or other specialist suppliers, you can be sure that the quality of your product can be assured to meet the required standards. USL超声波探伤设备，采用计算机装置来控制其射程，是为满足这些需求而专门设计的。USL 或其它专门的供应商与自动化的原材料处理单位一起协力，可以确保产品质量完全满足标准要求。 The systems can range in complexity from single probe units for continuous thickness monitoring, to multi probe assemblies for full wall inspection of rotating tube. The operation of test heads and the data acquisition sequence are controlled by sensors located in the handling unit and the test head itself. 该系统可以用复杂的单个探针单元进行连续的厚度监控，也可以集合多个探针对旋转管材的全壁进行探测。这些探头控制系统和获取的数据系列主要由传感器上的控制单元和探头本身来控制。 In the case of welded tube and pipe, test heads can be provided for manual or automated weld following. 碰到焊接管材时，这些探头可手动焊接或者自动焊接。 Because many customers have special requirements, we are always willing to modify or design systems to suit your particular needs. 由于许多客户有特别的需求，为满足您的专门需要，我们可以进行修改或者重新设计该系统。 System features 系统特性 Mechanical 机械性能 ．．．．．．．．．factory environments 密封的、经过调节的室内空气适应工厂的严厉环境 ．．rates (up to 10 kHz per channel with 4 simultaneous gates) 高速率获取数据（4个阀门同时高达10 kHz/每波段） ．．．Continuous．．．．．．．．．．．．．“chart recorder” type display, with recording and playback 可选择“图表记录器”显示，进行录入和重置 ． 4 美国康泰公司北京办事处（Contech Development, Inc.） 电话：010传真：010