《互换性与技术测量》之形位公差教材.ppt

0.05 1、Total Run-out－Total Run-out is a composite control affecting both the form and location of all surface elements simultaneously. 全跳动是限制整个被测表面跳动的一项指标。 3.A Total Run-out tolerance zone consists of two coaxial cylinders whose centers are located on the datum axis. 公差带是半径差为公差值0.05mm，且于基准轴线同轴的两圆柱面之间的区域。 基准A-B 2、公差框格——圆柱整个轮廓相对于公共基准轴线A-B的全跳动公差值为0.05。 Fig3. 44 3.7 Principle of Tolerance 定义：处理尺寸公差和形位公差关系的规定。 分类： 1.独立原则 Regardless of Feature Size(RFS) Principle of Independency (IP) 2.相关要求 Related requirement 包容要求 Envelope