HQ3620旋转式电子多臂机共轭凸轮运动规律分析及机械CAD图纸设计.doc

浙 江 理 工 大 学 机械与自动控制学院 毕业设计诚信声明 我谨在此保证：本人所做的毕业设计，凡引用他人的研究成果均已在参考文献或注释中列出。设计说明书与图纸均由本人独立完成，没有抄袭、剽窃他人已经发表或未发表的研究成果行为。如出现以上违反知识产权的情况，本人愿意承担相应的责任。 声明人（签名）： 年 月 日 摘 要 HQ3620是新昌鹤群机械有限公司新研发的多臂机，ZRB561是折入边装置，由于主要采用测绘仿造，性能有缺陷，因此需要对其进行优化。 本文分七章内容，探讨了国内外凸轮机构的研究状况，对HQ3620及ZRB561内的共轭凸轮机构进行机构分析，以测绘凸轮为基础，对其进行Pro/E运动仿真，再选择合适的运动规律拟合，由此拟合曲线我们可以通过计算公式计算凸轮轮廓，再将得到的凸轮进行运动仿真，将优化前后的曲线对比，计算拟合误差，从理论上判断优化的效果。样机的运行试验将最终确定凸轮的成功与否。 共轭凸轮作为多臂机的核心部件，其设计制造对纺织产品产量和质量有着至关重要的作用，但是由于其复杂的计算过程，增加了工程师的设计周期，一直是各大院校和制造厂家所要攻克的难点。为了方便快捷地完成共轭凸轮轮廓曲线设计，本文提出开发设计一款HQ共轭凸轮设计软件。该软件可在用户输入基本参数和运动参数后，自动生成共轭凸轮的轮廓线，减少了上述复杂的计算过程。因此研发该软件有着重要的实用价值。 关键词：HQ系列共轭凸轮；反求设计；VB；共轭凸轮设计软件； Abstract HQ3620 is a dobby and ZRB561 is a edge folding machine which are made by Xinchang HeQun machinery corporation.Owing to being amde by surveying and mapping,there are many defects in the performance.So optimal desingn should be done for them. This paper is divided into seven chapters.It discusses the domestic and foreign research situation of cam mechanism and analys the conjugate cam mechanism of HQ3620 and ZRB561.Take the mapping cam as a foundation motion simulation is took in Pro/E.We should select an appropriate law of motion to fitting the curve. Then, we can calculate the profile of the cam by formula with those curve and take a motion simulation for the cam.By comparison before and after,wo can calculate the deviation and judge the effect of optimization is good or bad.Running test of the prototype will ultimately determine the success or failure of the cam. Conjugate cam as a core component of dobby, its design and manufacture has a crucial role in the yield and quality of textile products. But because of its complicated calculation process, it increase the cycle of design engineers, and it is always a difficult problem in the major universities and manufacturers to overcome. In order to complete the design of conjugate cam profile curve quickly and easily, this paper puts forward the design of HQ conjugate cam des