SAMSON3240 Series.pptVIP

调节阀:基础  Control valves: Basics;;调节阀是用来在过程系统中调节流体流量的机动装置，由连接执行器的阀门组成，通过改变阀门截流件的位置来响应控制系统的信号. ;A control valve is a power-operated device used to modify the fluid flow rate in a process system. It consists of a valve connected to an actuator that is capable of changing the position of a closure member in the valve in response to a signal from the controlling system ;SAMSON 直行程阀门系列 SAMSON linear valve families;SAMSON Series 240;SAMSON Series 240;SAMSON 250, 280 和 290系列 SAMSON Series 250, 280 and 290:Many names, one design;是工厂和公用工程的重要基础元件 Are important basic components in plant and utility engineering 调节阀选择对整个工厂的投入、运营成本和安全是至关重要的 The selection is of utmost importance for the investment, operating costs and the safety of the entire plant 受制于调节管线、压力容器的架构和操作规程 Are subject to the construction and operating regulations governing pipelines and pressure vessels 密封、使用材料和要求测试是要考虑的重要方面 Tightness, the materials used and the required tests are crucial aspects to be considered 计算, 尺寸, 压力损失, 能量损耗是同等重要的细节 Calculation, sizing, pressure loss,energy consumption are equally important details ;单座阀 Globe valve ;SAMSON 调节阀: 模块化设计 SAMSON control valves: Modular concept ;? 阀类型 Valve type (如单座阀, 蝶阀…) (e.g. Globe valve, butterfly valve…) ? 连接方式 End connections (焊接, 螺纹, 法兰) (Welded ends, Threated ends, Flanges) ? 公称尺寸 Nominal size DN/NPS (选择依据流量系数) (selection based on flow coefficient) ? 公称压力 Nominal pressure PN (选择依据温度, 最大工作压力, 阀体材料） (selection based on temperature, max. operating pressure, body material） ? 允许差压 Permissible differential pressure：Dp? 流量系数 Flow coefficient: KV (SI) , CV (non-SI)? 流量特性，如线性 (lin), 等百分比 (%) Valve characteristic e.g. linear (lin), equal percentage (%) ;DN and NPS;铸铁 cast iron;铸造和锻造阀体 Cast and Forged Valve Bodies;阀铭牌 Valve nameplate;;截面积减小时流速增加 Fluid v